Timaru Sewing Centre - Inspiring Creativity

ML744D



Timaru Sewing Centre sewing machines

MyLock 744D Overlocker

The MyLock 744D with electronic control is an advanced overlocker with 2 needles and 2, 3 or 4 thread overlock stitching. The differential feed ratio, which is adjustable from .05 to 2.25, provides exceptional control for handling all types of fabrics and for creating desired special effects.

Threading is a breeze due to colour-coded thread guides and a self-threading lower looper. Simply lay the thread into the guide, flip a switch, and the lower looper is threaded. The guide is automatically returned to its normal position when you turn the balance wheel. And when you lift the presser foot for rethreading, the thread tensions are automatically released so you can draw the thread smoothly.

The MyLock 744D also lets you quickly switch to rolled hemming without changing the needle plate. A lower looper pre-tension stitch eliminates the need to change tension for rolled hems.
And for those awkward cuffs and trouser buttons there is even a freearm conversion. So when you want to make the most of your time and get professional results, the MyLock 744D is unmatched.

Standard Accessories:
  • Needle set x 1
  • Screwdriver (medium) x 1
  • Screwdriver (small) x 1
  • Tweezers x 1
  • Net
  • Spool cap
  • Lint brush
  • Needle threader
  • Spreader
  • Upper knife
  • Spanner
  • Oil
  • Attaching plate
  • Instruction book

Mylock 744D Features:
  • Easy upper knife retraction lever
  • Lay-in tension dial
  • Free arm & flat bed convertible
  • Easy rolled hem changeover
  • Cutting width 3.1mm - 7.3mm
  • Differential feed ratio 0.5-2.2
  • Seam type: 2, 3 and 4 thread overlock
  • Colour coded thread guides
  • Lower looper easy threading mechanisms
  • Optional attachments

Mylock 744D Specifications:
  • Free arm/Flat bed convertible
  • Skeleton type body construction
  • Lay-in type tension dial
  • 2, 3 &4 Thread Overlock
  • Speed up to 1300spm
  • Quick changeover to Rolled Hem
  • Seam Length: 1.00 to 5.00 mm
  • Seam Width: 2.00 to 5.70 mm
  • Adjustable Cutting Width 3.1 to 7.3mm
  • Differential feed: .05 to 2.25 mm
  • Adjustable foot pressure
  • Lay-in Tension Unit
  • Tension Discs Separate when Presser Foot Lifted
  • Heavy Duty Cutting System
  • Self Threading Lower Looper
  • Built-in Accessory Box
  • Waste Chip Box
  • Electronic Speed Control
  • Instructional DVD


Join the Mailing List

Subscribe to our email newsletter & receive updates right in your inbox.

* indicates required
Janome Machines
Singer
Elna
DMC
Crucci
Baby Lock